Difference between revisions of "MIRC"

From The Utopian Encyclopedia
Jump to: navigation, search
m
Line 7: Line 7:
  
 
:'''mIRC Version''' mIRC 6.3+
 
:'''mIRC Version''' mIRC 6.3+
       #1 Go to Tools --> Options
+
       #1 Go to Tools --> Options.
 
       #2 When the dialogue box pops up, select the Connect dropdown menu --> Options
 
       #2 When the dialogue box pops up, select the Connect dropdown menu --> Options
 
       #3 Check the box beside Reconnect on Disconnection
 
       #3 Check the box beside Reconnect on Disconnection
 
       #4 Click on Perform
 
       #4 Click on Perform
       #5 Enable perform on connect should also be ticked – this indicates you want the following commands to be carried each time you join UtoNet
+
       #5 Enable perform on connect should also be ticked.
 
       #6 If you want to specify these commands to only be performed on UtoNet, select Other Networks
 
       #6 If you want to specify these commands to only be performed on UtoNet, select Other Networks
 
       #7 Find UtoNet on the servers list, and highlight it.
 
       #7 Find UtoNet on the servers list, and highlight it.
Line 18: Line 18:
 
       #10 Click OK and you're done!
 
       #10 Click OK and you're done!
  
<img src="http://utimes.org/sites/default/files/imagecache/main/perf.png">
+
<img src="http://i154.photobucket.com/albums/s254/clareyap1987/perform.png">

Revision as of 15:06, 24 June 2009

How To

blahblah


Auto-Perform Commands

This sets up a set of instructions to perform whenever you connect to IRC. Also, when you disconnect from mirc due to your connection dropping out, it will auto connect you back onto mIRC and get you into your private channels.

mIRC Version mIRC 6.3+
     #1 Go to Tools --> Options.
     #2 When the dialogue box pops up, select the Connect dropdown menu --> Options
     #3 Check the box beside Reconnect on Disconnection
     #4 Click on Perform
     #5 Enable perform on connect should also be ticked.
     #6 If you want to specify these commands to only be performed on UtoNet, select Other Networks
     #7 Find UtoNet on the servers list, and highlight it.
     #8 Click OK.
     #9 Type up the list of commands you would like to perform each time you connect onto UtoNet e.g. NickServ identify
     #10 Click OK and you're done!

<img src="http://i154.photobucket.com/albums/s254/clareyap1987/perform.png">